Pedders Ezifit Rear Suspension Conversion Kit. Raised / Heavy Duty / LPG fitted cars. Subaru Outback, BR

Pedders Ezifit Rear Suspension Conversion Kit. Raised / Heavy Duty / LPG fitted cars. Subaru Outback, BR

This kit is used to replace the Original Self-Levelling Suspension.. This kit is a direct bolt in replacement. NO modifications to the vehicle are required. No extra parts are required.
“Will my vehicle really be returned to its original Ride height?” y’s, definitely!
The original Self Levelling system has a much weaker spring than would normally be used to carry the weight of the car. In this application, the shock absorber has a hydraulic self levelling function built into it. This function, unlike a normal shock absorber, also carries part of the vehicle weight.
As a consequence, failure of the self levelling function is what causes the vehicle to sit low as it is now solely reliant on the spring to support the weight of the vehicle.
Pedders Suspension overcome this by’supplying a matched set of dampers and springs specifically for this purpose. You can buy with full confidence that the vehicle will be the correct height and your troublesome and expensive self levelling dampers consigned to history.
This is the heavy duty kit suitable if you regularly carry heavy loads or tow a heavy trailer. We do another version of this kit with softer springs, Pedders part number 803225 for those using the vehicle as normal transport. If you are unsure which kit is most suitable, please do contact one of our staff who will do their best to help you.
Please note our vehicle height measurements are based on 16 inch wheels. This does not mean it will only fit cars with 16 inch wheels. The kit WILL fit irrespective of wheel size.

Key features

• Supplied as a MATCHED SET of pre-assembled suspension components including Pedders gas struts, Pedders coil springs, bump stops, boot kits and strut mounts.
• Reduced installation time as the components are supplied pre-assembled and ready for direct fitment.
• Individually’shock dyno tested as a complete suspension system mated to your existing O.E. hardware for quality assurance & performance.
• The Pedders EziFit 803253 will restore the height of your Outback.
• Pedders SportsRyder gas struts in the EziFit kit are made from heavy duty twin-tube gas construction technology & heavy duty reinforced double welded mountings for long term durability.
• The complete kit is a system designed and valved to work together.
• Also an easy & low cost way to convert from coil overs.
• All backed by our 2 Year / 40,000km warranty

Vehicle Height Information

Rear: 25mm HIGHER than standard.
Notes: Heights should be measured as shown in the secondary picture.

Suitable for:

Subaru/Outback/BR, 2.0lt 4cyl TD | 2009-2014/BR, 2.0lt 4cyl TD – Kits
Subaru/Outback/BR, 2.5lt 4cyl ULP | 2009-2014/BR, 2.5lt 4cyl ULP – Kits
Subaru/Outback/BR, 3.6lt 6cyl ULP | 2009-2014/BR, 3.6lt 6cyl ULP – Kits